Purlfrost | Window Film For Home Or Business | Retail Glass StickersCreated with Sketch.

WBOF - White Blackout Window Film

Block out visible light and get added privacy with our white blackout window film. Ideal for concealing stock, to make a room darker and more private, or to control the excess heat and glare. The material has a glossy finish and is available by the metre or cut to size.

Read More
Width
Length

Width
cm
  • Please Select Width
Height
cm
  • Please Select Height
  • Please Select Quantity
15% off - when you buy 2 films or more cut to the same measurements. The discount will be applied HERE, not at checkout.
  • You must confirm the measurements before continuing.
£0.00

Free UK shipping when you spend £100.00

Measurement Convertor

0 cm

Product Description

  • By the metre or cut to size
  • Glare reduced by 95%
  • Heat gain reduced by 86%
  • 100% privacy

This product is designed to block out almost all light penetration, to make a room darker or cooler, and also serves to provide comprehensive two-way privacy. The white blackout window film is also ideal for conservatory roofs where it will drastically reduce excess heat and glare making the room more usable all year round.

The material has a glossy finish and is 1.52m wide. You can purchase from 0.5m to 30m in length.

Unlike frosted window film which comes with a paper liner, this film comes with a clear polyester protective liner which has no metric grid printed on it. You'll therefore need a large flat surface, a straight edge and a retractable knife to cut the film to size yourself. To make the task easier, we recommend you order the film cut to your exact measurments.

 

IMPORTANT NOTE:
Please make sure you click the Specifications tab to check compatibility, as this product is not suitable for all types of glazing when used for solar control on exterior facing windows. However if used on internal windows or glass partitions, the film is suitable for all types of glass.
If you require complete blackout with no light bleed, please choose Black Blackout Film. White Blackout Film allows up to 1% light transmission, so might have to be doubled up to achieve 100% blacking out. For perfect results, you might have to add a bead of black/white silicone around the edge of the glass to completely stop the light from coming through.

How to apply

The film is applied to the glass using a soapy water solution. Please click here to view our video tutorial, showing how to apply large pieces of film. The process is the same for small pieces of film which you will be able to apply single handedly.

Maintenance instructions

Clean with a soapy water solution. Do not clean for at least a month after installation and do not apply any type of sticker or adhesive on the film. 

Samples

Not sure whether this is the right film for your purpose? We offer free 10cm x 10cm samples. The pictures depicting the film are only for illustration purposes, so a sample is recommended to make an educated choice. If you'd like to try a larger piece before committing to a large order, just order a small amount of film to test on a pane.

Returns and refunds

We will only accept returns for films purchased by the metre. Just send it back to us in it's original condition and packaging. We cannot accept returns for films cut to size however, as they have no resale value.

 


Back to top

Product Specification

Download
Performances WBOF - White Blackout Window Film
U V Transmission Help Icon 1%
Visible light reflection Help Icon 88%
Visible light transmission Help Icon 1%
Total solar energy rejected (Heat) Help Icon 86%
Solar reflection Help Icon 67%
Solar absorption Help Icon 27%
Solar transmission Help Icon 6%
Glare reduction Help Icon 95%
"g" value(Solar heat gain coef.) Help Icon 0.13
"u" value(EN673W/m2.k0) Help Icon 5
Emissivity Help Icon 0.1
Scratch resistant coating Help Icon YES
Compatibility Help Icon
Clear Single Pane Help Icon YES
Tinted Single Pane Help Icon NO
Reflective Tinted Single Pane Help Icon YES
Clear Double Pane (non toughened) Help Icon NO
Clear Double Pane (toughened glass) Help Icon YES
Clear Laminated single pane Help Icon NO
Clear Laminated Double Pane Help Icon NO
Tinted Double Pane (non toughened) Help Icon NO
Tinted Double Pane (toughened glass) Help Icon YES
Low-E Double Pane Help Icon NO
Gas Filled Double Pane Help Icon NO
Triple Pane Help Icon NO
Polycarbonate roof Help Icon NO
Domed skylights Help Icon NO
Application
Internal Help Icon YES
External Help Icon NO
Warranty
Internal warranty(Years) Help Icon 10
External warranty(Years) Help Icon N/A
Against Peeling Help Icon YES
Against Cracking Help Icon YES
Against Demetallization Help Icon YES

How To Apply

Step by step instructions on how to apply window film & frost glass

Regardless of the type of window film or stickers you purchase, whether frosted, tinted, mirror or decorative, the principle on how to fit window film will be the same. We also have several targeted video tutorials which you will find by clicking here

Glass Preparation (the crucial task)

Glass Preparation

Make a slip solution using a few drops of washing up liquid mixed with water in a spray bottle and thoroughly clean the glass. Use a glass scraper to remove specks of paint, or any other glass covering like stickers.

Film Cutting

Film Cutting

Unless your window film is already cut to size, and if the film has a paper liner with a metric grid, measure your glass at the top and bottom, and left and right and mark and cut your window film. You can also cut the film bigger than required and trim it once applied to the glass.

Film Application

Film Application

A. Thoroughly wet the glass with the slip solution.

B. Place the window film face down an a flat surface and expose a small amount of the adhesive or cling side.

C.  Spray the adhesive or cling side liberally with the slip solution as you peel off the protective liner.

D. Slip the adhesive or cling side of the film on the glass butting one edge and the top against the window frame or rubber gasket (double glazed unit).

 

Squeegee Technique

Squeegee Technique

A. Liberally wet the face of the film with the solution to act as a lubricant fro your squeegee or felt edged tool.

B-C. Squeeze out the solution from under the film using a firm and even pressure, starting from the top and working your way down and across the film.

Film Trimming

Film Trimming

Run a credit card and a retractable knife blade down the edge of the glass to trim any excess film. The thickness of the card will allow for a small gap to help any remaining solution to be squeezed out. Once trimming is complete go over the film once more to squeeze out all the solution. 

Final Checks

1. Make sure that all the solution has been squeezed out.

2. Wipe the film and any remaining solution with paper towel.

3. Inspect the film on both sides of the glass to check for any trapped solution or air bubbles.

How To Remove Window Film

Removing window film can be a very easy process, but it all depends on how long the film has been on the glass, and the type of film that was used.

Here's a video tutorial which shows the basic principal.

Typically, films are either made using PVC or PET.

PVC is  a soft material which can be peeled off the glass with a glass scraper. Any glue residue can be removed with soapy water and a scraper.

PET is a brittle material widely used for solar and safety film, and might be made of layers of mettalised material. To remove this type of film, use a wide glass scraper and lubricate with soapy water to remove the film.

As a rule, old PET film are more difficult to remove than PVC films.

For large panes, it is best to first score the film into strips with a sharp knife. This means that you can tackle it in more manageable pieces.

 

Measuring Tips

Ready to place your window film order?

You will first need to measure the glass, in centimetres, using a tape measure. Only measure the glass you want to cover.

Width: measure from left to right at the top and the bottom of the glass, and take note of the largest measurements (some older wooden windows are not perfectly square).
Height: measure from top to bottom on the left and the right of the glass, and take note of the largest measurements.

Top tip

Leaving a clear gap around frosted or patterned film is a stylish and practical option, allowing you to peep out when someone is at the door for example. To create a clear outline around the film, deduct twice the width of the desired clear outline, to the width and the height of your pane. 


For example, if you want a 1cm (10mm) clear gap all the way round, deduct 2cm from the width, and the same from the height.
Fitting the film with a gap all the way round is much easier, especially on old wooden windows and doors which are not always in the best condition, and where the edge of the glass has paint encroachment.
 

Care

How To Care For Your window film After Installation

Window film is very easy to look after and you won't need any special products to clean it with. In fact, soapy water, similar to the solution you used to apply the film is the best cleaning product. 

Do's

Wait for at least 3 weeks before first cleaning your film

Use soapy water

Use a soft cloth or paper towel

Use a rubber edged squeegee (unless the film is printed or has cut outs) in good condition

Don'ts

Do not use abrasive products

Do not use Amonia based products

Do not use defective or damaged squeegees

Caring for printed films, or films with cut-outs

Extra care must be taken when cleaning printed films, or films which have been cut out and have exposed edges. Gently clean with a soft cloth only, and take particular care around the cut areas. Do not rub too hard or use a squeegee as it could damage the print or your cut film.

Caring for static cling films & stickers

Take extra care around the edges and clean your sticker or film from the centre out. Do not use a squeegee.