Created with Sketch.

TSCF-20 Dark Charcoal Window Tint

Width
Length

Width
cm
  • Please Select Width
Height
cm
  • Please Select Height
  • Please Select Quantity
15% off - when you buy 2 films or more cut to the same measurements. The discount will be automatically applied to the price
I confirm that the measurements I entered are in centimetres and correct for width and height.
  • You must confirm the measurements before continuing.
£0.00

Measurement Convertor

0 cm

Product Description

The Dark Charcoal Tinted Film will allow 21% of light through.
This film is a non reflective self adhesive film, designed to be applied to your windows, to help reduce excess heat, glare and sunlight.
Once applied, the film gives a grey/charcoal appearance to the glass.

IMPORTANT NOTE:
If you are planning to install this film on a double glazed unit, make sure the glass is toughened. If it is, it will have a kite mark in one of the corners of the pane. If you apply this film on glass that is not toughened, the glass could crack due to poor build quality or older units.

How to order
You can order the film by the metre, or for ease of installation, cut to size. Unlike frosted window film which comes with a paper liner, this film comes with a clear polyester protective liner which has no metric grid printed on it. You'll therefore need a large flat surface, a straight edge and a retractable knife to cut the film to size, or have a quick look at our video tutorial which shows a quick and easy way to cut large pieces of film.

Where is the film most effective?
As a rule, we recommend  the darker films for south facing windows, where the sun is harsher. East facing windows will be exposed in the morning, when the sun is low, and west facing windows in the afternoon when the sun is high, but brighter. For east and west facing, we recommend both the dark and the medium films, depending on how exposed your windows are to the sun.
North facing windows shouldn't be too affected by the sun so a light grade of film will be suitable.

How to apply
The film is applied to the glass using a soapy water solution. Please click here to view our video tutorial, showing how to apply large pieces of film. The process is the same for small pieces of film which you will be able to apply single handedly.

Product Specification